1.    Replace the three filters and the oil
And replacement of a/oil is the most common in the maintenance project, is there a/fuel filter, air filter, oil filter, the function of them filters in gasoline, the impurity in the air and oil, prevent impurities from entering the engine inside, cause abnormal phenomenon such as engine abnormal wear or work. The ultimate purpose of replacing the tri filtration is to better protect the engine and extend the life of the engine, which is also the most routine maintenance project.

2.    Replace the timing belt regularly
The timing belt is the main function of valve-train used to drive the engine, the engine’s inlet and exhaust door open or closed at the appropriate time, to ensure that the engine cylinder can be normal suction and exhaust. For all of the engine, the timing belt is absolute can’t skip or fracture, if in the event of skip phenomenon, the engine can’t work normally, will appear unstable idle speed, speed up the phenomenon such as bad or no car; If the belt breaks at the right time, the engine will stall immediately, and the multi-valve engine will cause the piston to bend at the top of the valve, causing serious damage to the engine.

3.    Check the chassis
In the routine maintenance, in addition to some parts need to be replaced regularly, there are some parts need regular check, such as brake disc, brake pads, brake pipe, steering rod ball head, shock absorber, etc., and some rubber parts, such as tires, ball cage dustproof cover, upper and lower arm set and balance beam slab etc, these parts due to wear or aging failure will cause potential safety hazard to the motion of the vehicle, so we are doing maintenance also need a detailed examination of chassis parts.